Select your e-liquid
Coils
Tanks
Batteries
Drip tips
Chargers
DIY
Other
Bottles
Other
Showing 1–24 of 98 results
- Accessories, Aspire, Coils, Other, Tanks
Aspire Breeze NXT 2ml / 5.4ml Replacement Pod
Replacement pod Breeze NXT designed for pod systems Aspire Breeze NXT. The spare pod has a capacity of 2ml or 5.4ml for your e-liquid, and both replacements pods come with a protective cap. Moreover, each replacement pod has a Breeze NXT 0.8ohm mesh coil included.
Manufacturer Aspire Capacity 2ml or 5.4ml Coils Aspire Breeze NXT Mesh Coils Compatibility Aspire Breeze NXT Pod System ⓘ Drip a few drops of your e-liquid directly on the cotton inside the new heating head and let it soak. This will ensure your coil does not burn out.
SKU: ASPIRE-BREEZE-NXT-SPARE-POD - Accessories, Coils, DIY, Other
Coil Master Skynet 8-in-1 Prebuilt Coils
Coil Master Skynet 8in1 is a box of 48 pre-made coils. If you are RDA, RTA or RDTA vape tank user, then this coil collection is just the right for you. Handy and convenient selection of 8 high-performance exotic coils variants. Each coil set comes in 6 individual coils for each type.
Manufacturer Coil Master Type of coils Fused Clapton
Tortuosity
Clapton Parallel
Interlock Clapton
Fused Clapton (TWIST)
Flat Clapton
Clapton
Super Tiger CoilPackage contents 48x Coils SKU: COIL-MASTER-SKYNET-8IN1 - Accessories, DIY, Other
Holy Fiber – High-End Cellulose Fiber
Holy Fiber is an exciting new cellulose fiber wicking material made from wood pulp, making it extra absorbent and enhances flavour and wicking performance for RTA, RDTA and RDA tanks. Holy Fiber is 100% tasteless, heat resistant and offers much more durability than traditional cotton.
Manufacturer Holy Fiber – Holy Juice Lab Packing 7g – Packaged in a resealable bag Material Cellulose Fiber SKU: HOLY-FIBER-COTTON-DIY - Accessories, DIY, Other
Vpdam Vape Building Mat
Large multifunctional vape mat by Vpdam with a high-quality vape print is a must-have vaping piece of kit. It’s convenient and very handy for many aspects of vaping. It is commonly used for DIY, building coils, mixing e-liquids or simply to keep your vaping area, table and vape gear tidy and clean. The vaping mat prevets e-liquids spilling on surfaces and adds a bit of style to your vaping space. It’s made of high-quality and durable neoprene material with stitched edges for extended durability in size 800 x 400 mm (80 x 40 cm).
Manufacturer Vpdam Dimensions 800 x 400 mm (80 x 40 cm) Front Side Micro-texture neoprene Back Side Non-slip rubber Colour Black/Red SKU: VAPE-BUILD-MAT-VPDAM-LARGE - Accessories, Coils, DIY, Other
Wotofo – Juggernaut 0.28 Prebuilt Coils
The Juggernaut is one of the most durable coils available with a high flavour outcome. Two Clapton coils wrap around a flat wire to give a better surface area for a Juggernaut pre-made coil. The N80 Wotofo juggernaut coils come with a 0.28-ohm resistance.
Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling your RTA’s & RDA’s. This is where the Wotofo Tri-Core Fused Clapton N80 prebuilt coils come in to provide the convenience for rebuilders who may not be in the mood of wrapping your coils by hand at times.
Wotofo Juggernaut prebuilt coils can eliminate the hassle with its machine-accurate excellent work, offering remarkable flavour intensity and massive vapour production.
WARNING: Only for experienced vapers. Know your OHMS law.
Manufacturer WOTOFO Material N80 Inner size (26G+36G) x2 Outer size 0.1mm x 0.4mm Inner diameter 3mm Resistance 0.28Ω Package contents 10x Juggernaut Coils ⓘ Drip a few drops of your e-liquid directly on the cotton and let it soak. This will ensure your coil does not burn out.
SKU: WOTOFO-JUGGERNAUT-28 - Accessories, Other
Alpha3 E-juice Cap Removal Tool
Alpha 3 in 1 shortfill cap removal tool is a brilliant and simple tool for opening shortfill bottles and 10ml nibs. Why should you own one? Without Alpha3 Cap Removal, removing tops from any e-juice or shortfill bottle is a messy, timely and tricky business. Alpha 3 is the only tool you will ever need. Just push and lift to get the top off.
Alpha3 is designed with two removal features. One takes caps of the bigger shortfill bottles ( 60ml and 120ml ), and the other does the same with smaller 10ml bottles. To open any vape juice bottle has never been so easy and required so little effort. Your screwdrivers, pliers, teeth and nails will thank you for it. Alpha 3 e-juice opener is portable and made of high-quality full metal construction in black colour.
Manufacturer Alpha3 Opening 10ml, 60ml and 120ml e-juice bottles Material Lightweight Full Metal SKU: ALPHA3-CAP-REMOVAL - Accessories, Other
Aspire Nautilus GT – Extension PSU Glass Tube 4.2ml
Nautilus GT PSU (Polysulfone) tube will increase the size of your Nautilus GT tank to a nice 4.2ml of e-juice, which means less time filling, more time vaping. Moreover, the PSU tube glass brings a different and beautiful design to the original glass and is very easily installed. The GT extension glass is compatible only with the Nautilus GT Tank.
Manufacturer Aspire Tank 4.2ml Compatibility Aspire Nautilus GT tank SKU: ASPIRE-NAUTILUS-GT-PSU-TUBE - Accessories, Bottles, DIY, Other
E-liquid Bottle with Twist Cap 60ml
An e-liquid bottle with a capacity of 60ml for your e-juice. Ideal for mixing e-liquids and bases and this bottle has a smart twist cap that makes it easy to refill your e-cigarette. Wide neck makes it much easier to pour the base or e-juice into the bottle.
Volume 60ml Material PET SKU: ELIQUID-BOTTLE-TWIST-60ML - Accessories, DIY, Other
Fiber N’ Cotton – DIY Wicking
Fiber N’ Cotton is high-quality wicking material made out of two key materials – cotton and cellulose fibers. The cotton is handpicked, ensuring the silkiness and purified to guarantee the highest degree of wicking capacity and instant break-in time. Included fibres are those of highest food standard, highly absorbent and entirely safe for vaping at any temperature. Combine these two, and you get the perfect balance of soft and fluffy, yet durable and dense wicking material suitable for all vaping styles while reducing chances of the ugly dry hits.
Manufacturer Fiber N’ Cotton Packing 10g – Packaged in a resealable bag Material Organic cotton & cellulose fibers SKU: FIBER-N-COTTON-10G-WICKING - Accessories, Other
HorizonTech Falcon King Replacement Bulb Glass
Falcon King replacement bulb glass by HorizonTech is specially designed for the sub-ohm tank Falcon King. The real king of sub-ohm tanks as it delivers superb flavours of your e-juice. However, the Falcon King is not unbreakable and not every version has a large bubble glass. So if you need to replace it or want one to have one as a spare part, you can buy it here. The Falcon King Bulb glass will instantly boost the capacity of yourtank from 2ml to 6ml. Falcon King Bubble glass it’s made of high-quality food-grade Pyrex glass.
Manufacturer HorizonTech Tank 6ml Replacement Glass Material Pyrex Compatibility HorizonTech Falcon King Sub-Ohm Tank SKU: FALCON-KING-REPLACEMENT-GLASS-6ML - Accessories, Other
Innokin iSub B Spare Vape Glass
Innokin Replacement Pyrex Glass is specially designed for sub-ohm tank Innokin iSub B available in two different sizes. You can boost the capacity of your iSub B tank to 4ml, or you can pick a standard 2ml TPD version. ISub B spare glasses are made out of clear pyrex, which is quite durable, however not unbreakable.
Manufacturer Innokin Tank 2ml or 4ml Replacement Glass Material Pyrex Compatibility Innokin iSub B SKU: INNOKIN-ISUB-REPLACEMENT-GLASS - Accessories, DIY, Other
Wotofo Ceramic Tweezer
High-quality ceramic tweezers by WOTOFO. Wotofo vape ceramic tweezer is heat resistant up to 1300°C and non-conductive too. The ceramic tips get screwed to the stainless-steel body with two Philips screws on each hand. This tweezer head is corrosion-resistant, antistatic, and non-magnetic. It allows the vapers to tune their coils properly on the atomizers.
SKU: WOTOFO-CERAMIC-TWEEZER - Accessories, Other
21700 Battery Case
21700 battery case made from high-quality plastic material designed for one 21700 battery cell. This case is tiny and portable and will keep your batteries organised and safe. The case has a firm closure at the outside, which keeps your battery in place and prevents unwanted discharging caused by keys or coins.
SKU: 21700-BATTERY-CASE-1 - Accessories, Other, Tanks
Aspire PockeX – Spare Bubble Glass
Replacement glass tube designed for starter kit Aspire PockeX. The spare bulb glass is made from high-quality pyrex material and boosts the capacity of your PockeX from 2ml to a big 3.5ml. PockeX replacement glass will give you more time vaping and less time refilling.
Installation is fast and easy, all you need to do is to put the glass on the retaining base (PockeX Battery) and screw the top part on it.
Manufacturer Savvy Vapes Tank 3.5ml Alternative 2ml Standard Glass Tube Compatibility Aspire PockeX Starter Kit SKU: ASPIRE-POCKEX-BULB-GLASS - Accessories, Other
Aspire Tigon – Replacement Glass
Aspire Tigon Spare Replacement Glass has a standard 2ml capacity and fits e-cigarette Aspire Tigon. Aspire spare glass is cleanable and made of high-quality food-grade Pyrex glass, which makes it very durable but unfortunately not unbreakable. The Aspire parts are 100% genuine.
Manufacturer Aspire Tank 2ml Material Pyrex Compatibility Aspire Tigon SKU: ASPIRE-TIGON-SPARE-GLASS-2ML - Accessories, DIY, Other
Multifunctional Ceramic Tweezer – Eleaf
Vaper tweezer is a multifunctional tool designed for vapers who like to build their coils. Tweezer from Eleaf has ceramic tips, which gives you an ability to work with hot coils without a short circuit. The tweezer will also help you to unscrew the tight atomizers or tanks with diameter 7-24mm.
SKU: 12423 - Accessories, Other
Vandy Vape Kylin V2 RTA – Spare Bubble Glass
Replacement glass designed to RTA Vandy Vape Kylin V2 with its bubble design will instantly increase the e-liquid capacity from 2ml to 5ml. This spare glass is made from robust Pyrex material.
Manufacturer Vandy Vape Tank 5ml Compatibility Vandy Vape Kylin V2 RTA SKU: VANDY-VAPE-KYLIN-BUBBLE-REPLACEMENT-GLASS - Accessories, Other
Vaporesso Sky Solo Plus Replacement Glass Tube
Vaporesso Sky Solo Plus replacement pyrex glass is made of high-quality food-grade material and is available in two sizes as spare parts. The first glass has a standard capacity of 2ml for your e-liquid. The second has a bulb design and is capable of holding up to 8ml of e-juice.
Vaporesso Glass is easy to replace, perfectly compatible with the SKY SOLO PLUS starter kit and very durable but unfortunately not unbreakable.
Manufacturer Vaporesso Size 2ml or 8ml Replacement Glass Material Pyrex Compatibility Vaporesso Sky Solo PLUS SKU: VAPORESSO-SKY-SOLO-PLUS-SPARE-GLASS-TUBE - Accessories, Coils, DIY, Other
Wotofo – Alien Wires 0.30 Prebuilt Coils DIY
WOTOFO N80 prebuilt Alien Wires design coils with resistance 0.30ohm will bring you the optimal clouds and flavour.
Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling your RTA’s & RDA’s. This is where the Wotofo Alien Wire prebuilt coils come in to provide the convenience for rebuilders who may not be in the mood of wrapping your coils by hand at times.
Wotofo prebuilt coils can eliminate the hassle with its machine-accurate excellent work, offering remarkable flavour intensity and massive vapour production.
WARNING: Only for experienced vapers. Know your OHMS law.
Manufacturer WOTOFO Material N80 Inner size 28G x3 Outer size 36G Inner diameter 3mm Resistance 0.30Ω Package contents 10x Alien Wires Prebuilt Coils ⓘ Drip a few drops of your e-liquid directly on the cotton and let it soak. This will ensure your coil does not burn out.
SKU: WOTOFO-ALIEN-WIRES-COILS-30 - Accessories, Coils, DIY, Other
Wotofo – Braided 0.24 Prebuilt Coils
WOTOFO N80 prebuilt Braided design coils with resistance 0.24ohm offer excellent flavour intensity and huge vapour production.
Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling your RTA’s & RDA’s. This is where the Wotofo Braided prebuilt coils come in to provide the convenience for rebuilders who may not be in the mood of wrapping your coils by hand at times.
Wotofo Braided prebuilt coils can eliminate the hassle with its machine-accurate excellent work, offering remarkable flavour intensity and massive vapour production.
WARNING: Only for experienced vapers. Know your OHMS law.
Manufacturer WOTOFO Material N80 Inner size 0.3mmx0.6mm Outer size 40Gx32 Inner diameter 3mm Resistance 0.24Ω Package contents 10x Braided Coils ⓘ Drip a few drops of your e-liquid directly on the cotton and let it soak. This will ensure your coil does not burn out.
SKU: WOTOFO-BRAIDED-COILS-24 - Accessories, Coils, DIY, Other
Wotofo – Dual Core Fused Clapton 0.62 Prebuilt Coils
WOTOFO N80 prebuilt Dual Core Fused Clapton design coils with resistance 0.62ohm will bring you remarkable flavour intensity and massive vapour production.
Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling your RTA’s & RDA’s. This is where the Wotofo Dual Core Fused Clapton prebuilt coils come in to provide the convenience for rebuilders who may not be in the mood of wrapping your coils by hand at times.
Dual-Core Fused Clapton prebuilt coils can eliminate the hassle with its machine-accurate excellent work, offering remarkable flavour intensity and massive vapour production.
WARNING: Only for experienced vapers. Know your OHMS law.
Manufacturer WOTOFO Material N80 Inner size 28Gx2 Outer size 38G Inner diameter 3mm Resistance 0.62Ω Package contents 10x Dual Core Fused Clapton ⓘ Drip a few drops of your e-liquid directly on the cotton and let it soak. This will ensure your coil does not burn out.
SKU: WOTOFO-DUAL-CORE-FUSED-CLAPTON-62 - Accessories, Coils, DIY, Other
Wotofo – Tri Core Fused Clapton 0.17 Prebuilt Coils
WOTOFO Tri-Core Fused Clapton design prebuilt coils with resistance 0.17ohm offer great flavour intensity and massive vapour production.
Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling your RTA’s & RDA’s. This is where the Wotofo Tri-Core Fused Clapton N80 prebuilt coils come in to provide the convenience for rebuilders who may not be in the mood of wrapping your coils by hand at times.
Wotofo Tri-Core Fused Clapton prebuilt coils can eliminate the hassle with its machine-accurate excellent work, offering remarkable flavour intensity and massive vapour production.
WARNING: Only for experienced vapers. Know your OHMS law.
Manufacturer WOTOFO Material N80 Inner size 26Gx3 Outer size 38G Inner diameter 3mm Resistance 0.17Ω Package contents 10x Tri-Core Fused Clapton ⓘ Drip a few drops of your e-liquid directly on the cotton and let it soak. This will ensure your coil does not burn out.
SKU: WOTOFO-TRI-CORE-FUSED-CLAPTON-17 - Accessories, Other
Wotofo 18650 Battery Case
Wotofo carrying box for up to four 18650 batteries is here to keep your battery cells safe and organised. This 18650 battery case has a small design to fit in your pocket, it’s made from durable material, and it will prevent unwanted discharging caused by keys or coins. It has a firm closure at the outside and battery separators at the inside to keep the battery cells in place, so they don’t rattle around inside and break.
*Batteries are NOT Included
Manufacturer WOTOFO Battery Type 18650 Colour Clear with Wotofo design SKU: 18650-BATTERY-CASE-WOTOFO-4
