Select your e-liquid
Coils
Tanks
Batteries
Drip tips
Chargers
DIY
Other
Bottles
Accessories
Showing 1–24 of 277 results
-
- Accessories, Other
GeekVape Boost PLUS/PRO 510 Adaptor
GeekVape Aegis Boost Plus / Pro 510 Adapter is a small device that allows you to install your favourite 510 tanks onto your Aegis Boost Pro and Aegis Boost Plus. The 510 adapter is only compatible with the Boost Plus and Boost Pro pod mod.
Compatibility GeekVape Aegis Boost Plus
GeekVape Aegis Boost PROSKU: GEEKVAPE-AEGIS-BOOST-510-ADAPTOR - Accessories, DIY, Other
XL Vape Building Mat
A large multifunctional vape mat with a high-quality deathwish print is a must-have vaping piece of kit. It’s convenient and very handy for many aspects of vaping. It’s commonly used for DIY, building coils, mixing e-liquids or keeping your vaping area, table and vape gear tidy and clean. The vaping mat prevets e-liquids spilling on surfaces and adds a bit of style to your vaping space. It’s made of high-quality and durable neoprene material with stitched edges for extended durability in size 830 x 400 mm (83 x 40 cm).
Manufacturer Custom Dimensions 830 x 400 mm (83 x 40 cm) Front Side Micro-texture neoprene Back Side Non-slip rubber Colour Black/Red SKU: VAPE-BUILD-MAT-VPDAM-LARGE - Accessories, Other
18650 Battery Wrap Sleeve OBD Dinosaur
After a while, every battery will lose its skin, which is quite dangerous. But also if you have several battery cells and you are unsure and getting confused which one is charged, you can use this fancy shrink film. Just use a hairdryer to shrink the new wrapping over your 18650 batteries.
Compatibility 18650 Battery Size 72 x 19 mm ⓘRemember to handle batteries cells with care. Li-ion batteries are dangerous and can even explode when used incorrectly.
SKU: 18650-WRAP-OBD-PICKLE-1 - Accessories, Tanks
Aspire BP60 Replacement Pod 5ml
Aspire BP60 replacement pod with capacity 5ml for the Aspire BP60 Pod Mod. It features a comfortable drip tip and is protected by a durable cap. Refilling the tank is a simple task thanks to a silicone-seal side port, and the whole pod connects firmly to the mod with strong magnets. Adjustable airflow helps you dial in on your perfect vape. The BP60 pod is compatible with all BP coils.
Manufacturer Aspire Packing BP60 Pod (Coil no included) Tank Size 5ml Compatibility Aspire Bp60 Pod Mod SKU: ASPIRE-BP60-REPLACEMENT-POD-5ML - Accessories, Other
GeekVape Cerberus 5.5ml Bubble Glass
GeekVape Cerberus replacement bubble glass with a capacity of 5.5ml. The spare glass also comes with a chimney adapter to stop all your e-liquid from leaking out. The bubble glass is compatible with the sub-ohm tank GeekVape Cerberus.
Manufacturer GeekVape Tank 5.5ml, Pyrex Compatibility GeekVape Cerberus SKU: GEEKVAPE-CERBERUS-BUUBLE-GLASS - Accessories, Tanks
Innokin Kroma Z 4.5ml Replacement Pod
Innokin Kroma Z 4.5ml pod is a replacement pod designed for use with the Kroma Z pod kit. It has a huge 4.5ml capacity and, as such, makes an excellent replacement for the 2ml TPD version. The Kroma Z Pod comes with an extra 510 drip tip and two Zenith coils.
Manufacturer Innokin Packing Kroma Z pod, 2x Zenith Coil, Drip Tip Tank Size 4.5ml Compatibility Innokin Kroma Z Pod Kit SKU: KROMA-Z-SPARE-POD-4.5ML - Accessories, Coils, Coils, Innokin
Innokin Zenith/Zlide Coil Heads
Innokin Zenith Zlide coils, also known as Z Coil, are replacement coils for Zenith and Zlide vape tanks made by Innokin. Zenith coils are available in various resistances and made from high-quality materials to perfect your individual needs and vaping experience.
Each Innokin Z-Coil box comes with a scratch sticker and a security code so you can check the authenticity of this product. Box contains 5 coils (price per one coil).
Manufacturer Innokin Resistance 0.8Ω (14- 18W), 1.2Ω (10-14W), 1.6Ω (10-14W),
1.0Ω (20-25W), 0.3Ω (30-40W), Plexus 0.5Ω (14-19W)
Plex3D 0.48Ω (13-16W)Compatibility Innokin Zenith, Innokin Zlide ⓘ Drip a few drops of your e-liquid directly on the cotton inside the new heating head and let it soak. This will ensure your coil does not burn out.
SKU: INNOKIN-ZENITH-ZLIDE-COIL - Accessories, Batteries
Molicel P26A 18650 Battery 2600mAh
Molicel P26A 18650 batteries with a flat top and capacity 2600mAh, perfect for a wide range of e-cigarettes. This INR 18650 P26A cell is the fantastic original manufacturer of a positive cell being used by iJoy and Efest
Manufacturer Molicel Battery Type 18650 Battery capacity 2600mAh (0.2C discharge) Dimensions 65 mm x 18 mm Nominal Voltage 3.7V Discharge 25A Type Flat top SKU: MOLICEL-18650-2600MAH - Accessories, Coils, Coils, Smok
Smok TFV16 Lite Mesh Coils
Smok TFV16 Lite coils are sub-ohm coils explicitly designed for use with the Smok TFV16 Lite sub-ohm tank. You can choose between a 0.2Ω Conical mesh coil powered by nexMesh Technology or a 0.15Ω Dual mesh coil. Both of these coils have high wicking capability and provide crisp flavour along with intense cloud production. As sub-ohm coils, they are both suited for high VG e-liquids.
Manufacturer Smok Resistance Dual Mesh 0.15Ω, Conical Mesh 0.2Ω Compatibility Smok TFV16 LITE Tank ⓘ Drip a few drops of your e-liquid directly on the cotton inside the new heating head and let it soak. This will ensure your coil does not burn out.
SKU: SMOK-TFV16-LITE-COIL - Accessories, Other
Uwell Valyrian 2 6ml Bubble Glass
Uwell Valyrian 2 replacement bubble glass is made out of high-quality pyrex glass and offers this famous tank’s extended capacity. It has a capacity of 6ml means you don’t have to refill as often (unlike the original glass tube), and you can enjoy vaping.
Manufacturer Uwell Tank 6ml Compatibility Uwell Valyrian II Tank SKU: VALYRIAN-2-BUBBLE-GLASS-6ML - Accessories, Batteries
Vapcell 18650 Battery 2500mah
VapCell K25 18650 batteries with a flat top and capacity 2500mAh, perfect for a wide range of e-cigarettes.
Manufacturer VapCell Battery Type 18650 Battery capacity 2500mAh (0.2C discharge) Dimensions 65 mm x 18.2 mm Nominal Voltage 3.7V Pulse discharging current 35A Type Flat top SKU: VAPCELL-18650-2500MAH - Accessories, Coils, DIY
Coilology 7in1 Premade Coils
Coilology 7in1 Premade Coil kit is a set of 7 exotic and classic coils packed in a plastic storage box with 12 strips of cotton. The Nichrome coils will provide you with great flavour and massive clouds. These coils are low resistance, making them perfect for direct lung vaping designed for RDA/RBA/RTA/RDTA tanks.
Manufacturer Coilology Type of coils - 6 x Juggernaut
- 6x Multi-Strand
- 6x Framed Staple
- 6 x Fused Clapton
- 6 x Tri-Core fused Clapton
- 6 x Staple
- 6 x Chain Link
- 12 Strips of Cotton
Package contents 42 x Premade Coils (Ni80) SKU: COILOLOGY-NI80-PREMADE-COILS - Accessories, Coils, Coils, DIY
Geekvape Zeus X RTA Mesh Micromesh
GeekVape micromesh coil strips and feather cotton designed for the RTA GeekVape Zeus X Mesh. An absolute must-try for any users of rebuildable mesh tanks. Each pack contains two sheets of mesh and two cotton laces. Made from high-quality kanthal and at 0.2-ohm resistance (40-60w) or nichrome N80 with 0.7-ohm resistance. You can expect clean and authentic flavours as well as massive vapour production.
Manufacturer GeekVape Resistance 0.2Ω, 0.17Ω Material Kanthal KA1, Nichrome N80 Compatibility Zeus X Mesh ⓘ Drip a few drops of your e-liquid directly on the cotton inside the new heating head and let it soak. This will ensure your coil does not burn out.
SKU: GEEKVAPE-ZEUS-X-MICROMESH -
- Accessories, Coils, Coils, Smok
Smok RPM Coils
SMOK RPM Coils are intended for use in the SMOK e-cigarettes and pod systems. RPM coils have organic cotton for fast-wicking, and they are available in various resistances to cater to your style of vaping, including mesh, triple coil and single coil. SMOK RPM replacement coils can produce clouds of vapour at wattage levels above usual expectations for pod devices.
Manufacturer Smok Resistance MTL Mesh 0.3Ω, Triple Coil 0.6Ω, SC 1.0Ω Compatibility Various Smok Devices ⓘ Drip a few drops of your e-liquid directly on the cotton inside the new heating head and let it soak. This will ensure your coil does not burn out.
SKU: SMOK-RPM-COIL - Accessories, Other
18650 Battery Wrap Sleeve OBD Pickle
After a while, every battery will lose its skin, which is quite dangerous. But also if you have several battery cells and you are unsure and getting confused which one is charged, you can use this fancy shrink film. Just use a hairdryer to shrink the new wrapping over your 18650 batteries.
Compatibility 18650 Battery Size 72 x 19 mm ⓘRemember to handle batteries cells with care. Li-ion batteries are dangerous and can even explode when used incorrectly.
SKU: 18650-WRAP-OBD-PICKLE - Accessories, Other
18650 Battery Wrap Sleeve OBD Skull
After a while, every battery will lose its skin, which is quite dangerous. But also if you have several battery cells and you are unsure and getting confused which one is charged, you can use this fancy shrink film. Just use a hairdryer to shrink the new wrapping over your 18650 batteries.
Compatibility 18650 Battery Size 72 x 19 mm ⓘRemember to handle batteries cells with care. Li-ion batteries are dangerous and can even explode when used incorrectly.
SKU: 18650-WRAP-OBD-SKULL - Accessories, Drip tips
510 Drip Tip Innokin Black
Innokin 510 drip tip of a traditional shape made from a high-quality resin material. Drip tip comes in black colour with a white pattern and 12.7 x 8.7mm in diameter. The spare drip tip fits with the most 510 vape tanks. Owning one of these will make your tank look trendier.
Type 510 Colour Black with white pattern Material Resin SKU: 510-DRIP-TIP-INNOKIN-BLACK - Accessories, Coils, Coils
Caliburn G Coils UWELL
Caliburn G mesh coils by Uwell are replacement coils explicitly made for the new Uwell pod kit. Caliburn G 0.8Ω mesh coils offer incredible, the long-lasting flavour while 1.0Ω coils provide tighter draw.
Manufacturer UWELL Resistance 0.8Ω UN2 Meshed-H
1.0Ω KanthalBox Contains 4x Caliburn G Coil (price per one coil) Compatibility UWELL Caliburn G, Caliburn G Pods ⓘ Drip a few drops of your e-juice directly on the cotton inside the new Caliburn G coil and let it soak. This will ensure your coil does not burn out.
SKU: UWELL-CALIBURN-G-COILS - Accessories, Tanks
Caliburn G Pods UWELL
Uwell Caliburn G replacement pods are designed for use with Uwell Caliburn G e-cigarette, and it’s compatible only with Caliburn G mesh coils. With 2ml capacity, these pods accommodate removable coil system and easy to refill top-fill system.
Manufacturer UWELL Volume 2ml Box Contains 2x Caliburn G Pod (price per one pod) Coils UWELL Caliburn G Coils Compatibility UWELL Caliburn G Pod System SKU: UWELL-CALIBURN-G-PODS - Accessories, Coils, Coils
Falcon M1 Replacement Coils
HorizonTech Falcon M1, M1+ and F1 replacement coils are among the most popular and highly durable heating coils used in equally popular Falcon sub-ohm tanks. F1, M1 and M1+ Coils are compatible with the Falcon Sub-Ohm Tank, Falcon RESIN Artisan Edition Tank and the Horizon Falcon King.
HorizonTech coils are sold in a pack of 3 pieces, and the box comes with a scratch sticker and a security code so you can check the authenticity of this product or as a single coil.
Manufacturer HorizonTech Resistance M1 0.15 Ω (70-80W)
M1+ 0.16 Ω (75W)
F1 0.2Ω (70-85W)Box Contains 3x M coils (price per one coil) Compatibility Falcon Sub-Ohm Tank
Falcon RESIN Artisan Edition Tank
Horizon Falcon Kingⓘ Drip a few drops of your e-juice directly on the cotton inside the new heating head and let it soak. This will ensure your coil does not burn out.
SKU: FALCON-M1-COILS - Accessories, Coils, DIY, Other
nexMESH OFRF Wotofo Mesh Strips 0.13Ω
NexMESH OFRF mesh strips by Wotofo with a resistance of 0.13Ω (60-70w) will fulfill all your vapour needs. These mesh strips will provide you with big clouds and triple density mesh netting, maximising the heating surface area. Nexmesh strips will deliver a thicker and more intense flavour.
WARNING: Prebuilt coils are only for experienced vapers. Know your OHMS law.
Manufacturer WOTOFO Dimensions 16 x 6.8mm Resistance 0.13Ω A1 (60-70W) Package contents 10x Mesh Strips Coils ⓘ Drip a few drops of your e-liquid directly on the cotton and let it soak. This will ensure your coil does not burn out.
SKU: WOTOFO-OFRF-MESH-STRIPS-0.13
